1. 耐磨性能优异，使用寿命长
经中南大学粉末冶金研究所测定，特种陶瓷的耐磨性相当于锰钢的266倍，高铬铸铁的171.5倍。根据的现场运行经验，皮带机陶瓷滚筒、输送带陶瓷滚筒耐用时间至少5年以上，减少维修频次和费用。
实践证明，陶瓷滚筒使用寿命是传统包胶滚筒的10倍以上。
2. 摩擦阻力大，不打滑
传统橡胶防磨层经过一段时间磨损后，表面变得光滑，易造成皮带打滑跑偏。陶瓷片表面有凸点，粗糙度高，陶瓷与皮带相互接触之间摩擦系数大，所以连续作业不易打滑及跑边。
3. 陶瓷粘接牢固
在施工过程中，用高强度陶瓷金属粘合剂将衬板粘到金属筒体后，相互挤紧，使之没有间隙；同时陶瓷与滚筒接触面有独特的“燕尾槽”设计，陶瓷与滚筒间粘胶厚度确保1mm以上，粘接剪切强度确保12Mpa以上，确保不发生陶瓷片脱落现象。
4. 安装简便
施工工艺成熟、简便、周期短。在钢结构做好后，一个安装工人1天内一般可完成一台陶瓷滚筒包胶的安装，不耽误客户生产，方便用户及时投入生产。
5. 每列陶瓷间的沟槽，便于排水排泥
陶瓷滚筒有我公司独特的排水沟结构设计，可以把雨水和散落的粉料尽快从水沟上排除掉。
英文：
The surface of the ceramic roller of the
belt conveyor is a bumped corundum ceramic anti-wear layer to increase the
surface friction, and then bonded with the high-strength ceramic metal adhesive
for the roller. The normal service life is more than 10 times that of the
rubber-coated roller.
Performance advantages of wear-resistant
ceramic drums:
?
Compared with traditional rubberized
rollers, the advantages are:
1. Excellent wear resistance and long
service life
According to the Institute
of Powder Metallurgy, Central South University,
the wear resistance of special ceramics is equivalent to 266 times that of
manganese steel and 171.5 times that of high chromium cast iron. According to
the field operation experience, the belt ceramic roller and the belt ceramic
roller have a durability of at least 5 years, reducing the frequency and cost
of maintenance.
Practice has proved that the service life of ceramic drum is more
than 10 times that of traditional rubberized roller.
2. High frictional resistance, no slip
After a period of wear and tear on the traditional rubber wear
layer, the surface becomes smooth, which tends to cause the belt to slip and
run off. The surface of the ceramic sheet has bumps and high roughness. The
friction coefficient between the ceramic and the belt is large, so continuous
operation is not easy to slip and run.
3. Ceramic bonding is firm
During the construction process, the liner is adhered to the metal
cylinder with high-strength ceramic metal adhesive, and then squeezed tightly
to make it have no gap; at the same time, the ceramic and roller contact
surface has a unique "dovetail groove" design, ceramic and roller The
thickness of the adhesive is ensured to be more than 1 mm, and the bonding shear strength is ensured to be
12 Mpa or more to ensure that the ceramic sheet does not fall off.
4. Easy to install
The construction process is mature, simple, and short in cycle.
After the steel structure is completed, an installation worker can generally
complete the installation of a ceramic drum rubber in one day, without delaying
the customer's production, and facilitating the user to put into production in
time.
5. The groove between each column of
ceramics is convenient for draining mud
The ceramic drum has our unique drainage structure design, which can
remove rainwater and scattered powder from the ditch as soon as possible.
联系我时请说明是在<好运物流网>上看到的，有优惠哦！谢谢！